Once you understand how to use “TreeDist” to calculate tree distances, the next step is to provide some context for the calculated distances.

The maximum value of most tree distance metrics scales with the size of the trees being compared. Typically, the resolution of the trees also impacts the range of possible values. As such, it can be difficult to interpret the tree distance value without suitable context.

Normalizing a distance metric is one way to render its meaning more obvious. Selecting an appropriate normalizing constant may require careful consideration of the purpose to which a tree distance metric is being put.

The default normalization behaviour of each function when
`normalize = TRUE`

is listed in the function reference, or can be viewed
by typing `?FunctionName`

in the R terminal.

Let’s work through a simple example using the Nye *et al*.
(2006) similarity metric to compare two
imperfectly-resolved trees.

```
library("TreeDist")
<- ape::read.tree(text = '(A, ((B, ((C, D), (E, F))), (G, (H, (I, J, K)))));')
tree1 <- ape::read.tree(text = '(A, (B, (C, D, E, (J, K)), (F, (G, H, I))));')
tree2 VisualizeMatching(NyeSimilarity, tree1, tree2,
Plot = TreeDistPlot, matchZeros = FALSE)
```

This is a nice metric to start with, because the maximum similarity between each pair of splits is defined as one. (Astute readers might worry that the minimum similarity is greater than zero – that’s a harder problem to overcome.)

As such, the maximum similarity possible between two 11-leaf trees is
`NSplits(11)`

= 8.

Normalizing against this value tells us how similar the two trees are, compared to two identical eleven-leaf binary trees.

`NyeSimilarity(tree1, tree2, normalize = FALSE) / 8`

`## [1] 0.2744048`

`NyeSimilarity(tree1, tree2, normalize = 8)`

`## [1] 0.2744048`

This approach will result in a similarity score less than one if two
trees are identical, but not fully resolved (i.e. binary).

As such, we might prefer to compare the tree similarity to the maximum
score possible for two trees of the specified resolution. This value is
given by the number of splits in the least resolved of the two
trees:

```
NyeSimilarity(tree1, tree2,
normalize = min(TreeTools::NSplits(list(tree1, tree2))))
```

`## [1] 0.5488095`

More concisely, we can provide a normalizing function:

`NyeSimilarity(tree1, tree2, normalize = min)`

`## [1] 0.2744048`

This approach will produce a similarity of one if one tree is a less-resolved version of another (and thus not identical).

If we are comparing lists of trees, this best value will depend on
the number of splits in each pair of trees. We can use the function
`pmin()`

to select the less resolved of each pair of
trees:

`NyeSimilarity(list(tree1, tree2), list(tree1, tree2), normalize = pmin)`

```
## [,1] [,2]
## [1,] 0.8750000 0.2744048
## [2,] 0.2744048 0.5000000
```

To avoid these limitations, we may instead opt to normalize against
the average number of splits in the two trees. This is the default
normalization method for `NyeSimilarity()`

:

`NyeSimilarity(tree1, tree2, normalize = TRUE)`

`## [1] 0.3991342`

Finally, if `tree1`

is a “target” tree – perhaps one that
has been used to simulate data from, or which is independently known to
be true or virtuous – we may wish to normalize against the best possible
match to that tree.

In that case, the best possible score is

`::NSplits(tree1) TreeTools`

`## [1] 7`

and our normalized score will be

`NyeSimilarity(tree1, tree2, normalize = TreeTools::NSplits(tree1))`

`## [1] 0.3136054`

The diameter (maximum possible distance) of the Nye *et al*.
tree similarity metric is easy to calculate, but this is not the case
for all metrics. For example, the clustering information distance metric
(Smith, 2020) ranges in principle from
zero to the total clustering entropy present in a pair of trees. But
with even a modest number of leaves, no pairs of trees exist in which
every split in one tree is perfectly contradicted by every other split
in the other; as such, any pair of trees will necessarily have some
degree of similarity.

In such a context, it can be relevant to normalize tree similarity
against the *expected* distance between a pair of random trees,
rather than a maximum value (see Vinh, Epps,
& Bailey, 2010). On this measure, distances greater than one
denote trees that are more different than expected by chance, whereas a
distance of zero denotes identity.

With the quartet divergence, the expected tree distance is readily calculated: any given quartet has a one in three chance of matching by chance.

```
library("Quartet", exclude = "RobinsonFoulds")
<- 2 / 3
expectedQD <- QuartetDivergence(QuartetStatus(tree1, tree2),
normalizedQD similarity = FALSE) / expectedQD
```

The expected distance is more difficult to calculate for other metrics, but can be approximated by sampling random pairs of trees. Measured distances between 10 000 pairs of random bifurcating trees with up to 200 leaves are available in the data package ‘TreeDistData’. We can view (normalized) distances for a selection of methods:

```
if (requireNamespace("TreeDistData", quietly = TRUE)) {
library("TreeDistData", exclude = "PairwiseDistances")
data("randomTreeDistances", package = "TreeDistData")
<- c("pid", "cid", "nye", "qd")
methods <- c(pid = "#e15659", cid = "#58a14e", nye = "#edc949",
methodCol qd = "#af7aa1")
<- par(cex = 0.7, mar = c(5, 5, 0.01, 0.01))
oldPar <- as.integer(dimnames(randomTreeDistances)[[3]])
nLeaves plot(nLeaves, type = "n", randomTreeDistances["pid", "mean", ],
ylim = c(0.54, 1),
xlab = "Number of leaves",
ylab = "Normalized distance between random tree pairs")
for (method in methods) {
<- randomTreeDistances[method, , ]
dat lines(nLeaves, dat["50%", ], pch = 1, col = methodCol[method])
polygon(c(nLeaves, rev(nLeaves)), c(dat["25%", ], rev(dat["75%", ])),
border = NA, col = paste0(methodCol[method], "55"))
}
text(202, randomTreeDistances[methods, "50%", "200"] + 0.02,
c("Different phylogenetic information",
"Clustering information distance",
expression(paste(plain("Nye "), italic("et al."))),
"Quartet divergence"
col = methodCol[methods], pos = 2)
), par(oldPar)
}
```

`## Warning in rm(list = exclude, envir = env): object 'PairwiseDistances' not found`

or use these calculated values to normalize our tree distance:

```
<- randomTreeDistances["cid", "mean", "9"]
expectedCID ClusteringInfoDistance(tree1, tree2, normalize = TRUE) / expectedCID
```

Similarity has two components: precision and accuracy (Smith, 2019). A tree can be 80% similar to a target tree because it contains 80% of the splits in the target tree, and no incorrect splits – or because it is a binary tree in which 10% of the splits present are resolved incorrectly and are thus positively misleading.

In such a comparison, of course, it is more sensible to talk about
split *information* than just the number of splits: an even split
may contain more information than two very uneven splits, so the absence
of two information-poor splits may be preferable to the absence of one
information-rich split. As such, it is most instructive to think of the
proportion of information that has been correctly resolved: the goal is
to find a tree that is as informative as possible about the true
tree.

Ternary diagrams allow us to visualise the quality of a reconstructed tree with reference to a known “true” tree:

```
<- list(
testTrees trueTree = ape::read.tree(text = '(a, (b, (c, (d, (e, (f, (g, h)))))));'),
lackRes = ape::read.tree(text = '(a, (b, c, (d, e, (f, g, h))));'),
smallErr = ape::read.tree(text = '(a, (c, (b, (d, (f, (e, (g, h)))))));'),
bigErr = ape::read.tree(text = '(a, (c, (((b, d), (f, h)), (e, g))));')
)VisualizeMatching(MutualClusteringInfo, testTrees$trueTree, testTrees$lackRes)
points(4, 7.5, pch = 2, cex = 3, col = "#E69F00")
```

```
VisualizeMatching(MutualClusteringInfo, testTrees$trueTree, testTrees$smallErr)
points(4, 7.5, pch = 3, cex = 3, col = "#56B4E9")
```

```
VisualizeMatching(MutualClusteringInfo, testTrees$trueTree, testTrees$bigErr)
points(4, 7.5, pch = 4, cex = 3, col = "#009E73")
```

Better trees plot vertically towards the “100% shared information” vertex. Resolution of trees increases towards the right; trees that are more resolved may be no better than less-resolved trees if the addition of resolution introduces error.

```
if (requireNamespace("Ternary", quietly = TRUE)) {
library("Ternary")
<- par(mar = rep(0.1, 4))
oldPar TernaryPlot(alab = "Absent information", blab = "Shared information",
clab = "Misinformation",
lab.cex = 0.8, lab.offset = 0.18,
point = "left", clockwise = FALSE,
grid.col = "#dedede", grid.minor.lines = 0,
axis.labels = 0:10 / 10, axis.col = "#aaaaaa")
HorizontalGrid()
<- MutualClusteringInfo(testTrees$trueTree, testTrees)
correct <- ClusteringEntropy(testTrees)
resolved <- resolved["trueTree"] - resolved
unresolved <- resolved - correct
incorrect TernaryPoints(cbind(unresolved, correct, incorrect),
pch = 1:4, cex = 2, col = Ternary::cbPalette8[1:4])
par(oldPar)
}
```

Here’s a noddy real-world example applying this to a simulation-style study.

First, let’s generate a starting tree, which will represent our reference topology:

```
set.seed(0)
<- TreeTools::RandomTree(20, root = TRUE) trueTree
```

Then, let’s generate 200 degraded trees. We’ll move away from the true tree by making a TBR move, then reduce resolution by taking the consensus of this tree and three trees from its immediate neighbourhood (one NNI move away).

```
<- requireNamespace("TreeSearch", quietly = TRUE)
treeSearchInstalled if (treeSearchInstalled) {
library("TreeSearch", quietly = TRUE) # for TBR, NNI
<- structure(lapply(seq_len(200), function(x) {
oneAway <- TBR(trueTree)
tbrTree ::consensus(list(tbrTree,
apeNNI(tbrTree),
NNI(tbrTree),
NNI(tbrTree)))
class = "multiPhylo")
}), else {
} message("Install \"TreeSearch\" to run this example")
}
```

And let’s generate 200 more trees that are even more degraded. This time we’ll move further (three TBR moves) from the true tree, and reduce resolution by taking a consensus with three trees from its wider neighbourhood (each two NNI moves away).

```
if (treeSearchInstalled) {
<- structure(lapply(seq_len(200), function(x) {
threeAway <- TBR(TBR(TBR(trueTree)))
tbrTree ::consensus(list(tbrTree,
apeNNI(NNI(tbrTree)),
NNI(NNI(tbrTree)),
NNI(NNI(tbrTree))))
class = "multiPhylo")
}), }
```

Now let’s calculate their tree similarity scores. We need to calculate the amount of information each tree has in common with the true tree:

```
if (treeSearchInstalled) {
<- MutualClusteringInfo(trueTree, oneAway)
correct1 <- MutualClusteringInfo(trueTree, threeAway)
correct3 }
```

The amount of information in each degraded tree:

```
if (treeSearchInstalled) {
<- ClusteringEntropy(oneAway)
infoInTree1 <- ClusteringEntropy(threeAway)
infoInTree3 }
```

The amount of information that could have been resolved, but was not:

```
if (treeSearchInstalled) {
<- ClusteringEntropy(trueTree) - infoInTree1
unresolved1 <- ClusteringEntropy(trueTree) - infoInTree3
unresolved3 }
```

And the amount of information incorrectly resolved:

```
if (treeSearchInstalled) {
<- infoInTree1 - correct1
incorrect1 <- infoInTree3 - correct3
incorrect3 }
```

In preparation for our plot, let’s colour our one-away trees orange , and our three-away trees blue :

```
<- hcl(200, alpha = 0.9)
col1 <- hcl(40, alpha = 0.9)
col3 <- matrix(col2rgb(col1, alpha = TRUE), nrow = 4, ncol = 181)
spec1 <- matrix(col2rgb(col3, alpha = TRUE), nrow = 4, ncol = 181)
spec3 4, ] <- spec3[4, ] <- 0:180
spec1[<- function(x) rgb(x[1], x[2], x[3], x[4], maxColorValue = 255)
ColToHex <- apply(spec1, 2, ColToHex)
spec1 <- apply(spec3, 2, ColToHex) spec3
```

Now we can plot this information on a ternary diagram.

```
if (treeSearchInstalled && requireNamespace("Ternary", quietly = TRUE)) {
layout(matrix(c(1, 2), ncol = 2), widths = c(5, 2))
<- par(mar = rep(0, 4))
oldPar TernaryPlot(alab = "Information absent in degraded tree",
blab = "\n\nCorrect information in degraded tree",
clab = "Misinformation in degraded tree",
point = "left", clockwise = FALSE, grid.minor.lines = 0,
axis.labels = 0:10 / 10)
HorizontalGrid()
<- cbind(unresolved1, correct1, incorrect1)
coords1 <- cbind(unresolved3, correct3, incorrect3)
coords3
ColourTernary(TernaryDensity(coords1, resolution = 20), spectrum = spec1)
ColourTernary(TernaryDensity(coords3, resolution = 20), spectrum = spec3)
TernaryDensityContour(coords3, col = col3, nlevels = 4)
TernaryDensityContour(coords1, col = col1, nlevels = 4)
if (requireNamespace("kdensity", quietly = TRUE)) {
library("kdensity")
<- function(dat, col, add = FALSE) {
HorizontalKDE <- 1
lty <- 2
lwd <- kdensity(dat)
kde <- kdensity:::get_range(kde)
kdeRange if (add) {
lines(kde(kdeRange), kdeRange, col = col, lty = lty, lwd = lwd)
else {
} plot(kde(kdeRange), kdeRange, col = col, lty = lty, lwd = lwd,
ylim = c(0, 1), main = "", axes = FALSE, type = "l")
}# abline(h = 0:10 / 10) # Useful for confirming alignment
}
par(mar = c(1.8, 0, 1.8, 0)) # align plot limits with ternary plot
HorizontalKDE(correct1 / infoInTree1, col1, add = FALSE)
HorizontalKDE(correct3 / infoInTree3, col3, add = TRUE)
mtext("\u2192 Normalized tree quality \u2192", 2)
}par(oldPar)
else {
} message("Install \"TreeSearch\" and \"Ternary\" to generate this plot")
}
```

In the ternary plot, the vertical direction corresponds to the normalized tree quality, as depicted in the accompanying histogram.

You may wish to:

Explore the Ternary package

Review available distance measures and the corresponding TreeDist functions

Construct tree spaces to visualize landscapes of phylogenetic trees

Nye, T. M. W., Liò, P., & Gilks, W. R. (2006). A novel algorithm and web-based tool for comparing two
alternative phylogenetic trees. *Bioinformatics*,
*22*(1), 117–119. doi:10.1093/bioinformatics/bti720

Smith, M. R. (2019). Bayesian and parsimony approaches reconstruct
informative trees from simulated morphological datasets. *Biology
Letters*, *15*(2), 20180632. doi:10.1098/rsbl.2018.0632

Smith, M. R. (2020). Information theoretic Generalized
Robinson-Foulds metrics for comparing phylogenetic trees.
*Bioinformatics*, *36*(20), 5007–5013. doi:10.1093/bioinformatics/btaa614

Vinh, N. X., Epps, J., & Bailey, J. (2010). Information theoretic measures for clusterings
comparison: variants, properties, normalization and correction for
chance. *Journal of Machine Learning Research*,
*11*, 2837–2854. doi:10.1145/1553374.1553511